X2 MKP62
|
 |
0.01~10μF 250~330VAC -40~110℃ P:10~42.5mm |
1.Withstand high excess voltage shocks 2.Excellent flame retardant and moisture proof (IEC60384-14Ⅱ) UL,VDE,ENEC,CQC,ROHS,REACH |
Power EMI resistance |
|
MPR CBB21
|
 |
0.01~10μF 100~630VDC -40~105℃ P:10~32.5mm |
1.High frequency and low dissipation factor 2.Low temperature rise inside 3.Excellent flame retardant and moisture proof |
1. Widely used in high frequency DC, AC and pulse circuit. 2. Filtering circuit after rectified. |
|
MPB CBB24
|
 |
0.01~3.3μF 100VAC~440VAC -40~105℃ P:10~32.5mm |
1.Low dissipation 2.Low temperature rise inside, High isolation resistance 3.Excellent flame retardant and moisture proof |
1. Widely used in reduction voltage products. 2. Carrier signal transmission circuit |
|
PPS CBB81
|
 |
0.001~0.033μF 1000VDC~3000VDC -40~85℃ P:10~25mm |
1. High working voltage range. 2.High frequency and low dissipation factor. 3.Low temperature rise inside. 4.Excellent flame retardant and moisture proof. |
1. Widely used in high pulse and large current circuit. 2. Widely used in resonance oscillation circuit. 3. Widely used in horizontal resonance circuits of monitor and color TV. 4.Suitable for electronic ballast. |
|
PPN CBB13
|
 |
0.001~0.47μF 100VDC~630VDC -40~85℃ P:8.5~25mm |
1. High frequency and low dissipation factor and Low temperature rise inside. 2. Temperature has little effect on capacitance and dissipation. 3. Excellent flame retardant and moisture proof |
1.Widely used in switch power supply, lights, welder and calibrating capacitor etc |
|
MPT CBB20
|
 |
0.01~82μF 100VDC~630VDC -40~105℃ |
1.Wide capacitance range 2. Excellent damp proof 3.Excellent stability |
1.Widely used in high frequency power supply 2.Suitable for sound equipment |
|
MPA CBB20A
|
 |
0.01~82μF 100VDC~630VDC -40~105℃ |
1.Wide capacitance range. 2. Excellent moisture proof. 3.Excellent stability. |
1.Widely used in high frequency power supply. 2.Suitable for sound equipment. |
|
MPFC
|
no image |
0.1~2.2μF 450VDC~630VDC -40~105℃ P:10~22.5mm |
1. Low noise, 26db (max) 60Hz. 2. High temperature and humidity epoxy resin. 3. Heat resisting PP film to 110℃ |
1. Electronics(Power supply, display, Lighting rectifier) |
|
MER CL21
|
 |
0.01~10μF 50~630VDC -40~125℃ P:7.5~32.5mm |
1. High impedance, non inductance structure. 2. High reliability and stability of capacitance, meanwhile has the self-healing property. |
For the DC and pulse circuit, widely used in electrical and industrial equipment for filtering blocking, noise suppressor, by-pass and coupling etc. |
|
MEB CL233
|
 |
0.01~10μF 63~630VDC -55℃~105℃ P:10~27.5mm |
1. Non inductance structure and good self-healing. 2. High insulation resistance and good stability of capacitance. |
By passing, coupling, blocking, pulsing, decoupling, logic, timing, oscillating circuit and use in low voltage circuit. |
|
MET CL20
|
 |
0.01~68μF 50~630VDC -40~125℃ |
1. Excellent moisture resistance and high impedance. 2. High stability of capacitance over the operating temperature. 3. Self-healing property. |
Widely used in TV, Radio, power, frequency divide circuit, all kinds of DC and pulse circuit. |
|
MEA CL20A
|
 |
0.01~68μF 50~630VDC -40~125℃ |
1. Excellent moisture resistance and high impedance. 2. High stability of capacitance over the operating temperature. 3. Self-healing property. |
Widely used in TV, Radio, power, frequency divide circuit, all kinds of DC and pulse circuit. |
|
METF
|
 |
0.1~2.2μF 450VDC 630VDC -40~125℃ P:10~22.5mm |
1. Safety film design, small size. 2. Will be open circuit rather than burn when break down. 3. Low noise, 26db (max) 60Hz. |
1. Electronics(Power supply, display, lighting rectifier, etc) |
|
MEFC
|
no image |
0.1~2.2μF 450VDC 630VDC -40~125℃ P:10~22.5mm |
1. Non inductance structure and good self-healing. 2. High insulation resistance and good stability of capacitance. 3. Low noise, 26db (max) 60Hz. |
1. Electronics(Power supply, display, lighting rectifier, etc) |
|
MSR CL21X
|
 |
0.001~1.0μF 63~100VDC -40~105℃ P:5.0/7.5mm |
1. Miniature size and light weight. 2.Excellent self-healing and high reliability; 3.Coated with flame retardant epoxy; |
Widely used in home appliances, lights, meters, etc. |
|
BME CL233X
|
 |
0.001~2.2μF 50~630VDC -40~105℃ P:5mm |
1. Miniature size and light weight. 2.Excellent self-healing and high reliability. 3. Plastic box provide the identical appearance. |
By passing, coupling, blocking, pulsing, decoupling, logic, timing, oscillating circuit, and use in low voltage circuit. |
|
PEI CL11
|
 |
0.001~0.47μF 50V~1200V -40~105℃ P:3.5~8.5mm |
1. Small, light, low price. 2. Lead directly to the welding electrode, low dissipation. 3. Vacuum coated with epoxy. |
Widely used in DC and pulse circuit of TV and all kinds of electrical equipment. |
|